CAE-Based Analysis and Design Optimization of Ventilation Performance for Commercial Panel Vans
DOI:
https://doi.org/10.5281/zenodo.21339283Keywords:
Flow optimization, Cabin comfort, Airflow analysis, Interior trim designAbstract
In this study, the design optimization of ventilation components integrated into the interior trim system of 15 m³ panel vans and minibus are investigated. During the analysis process, computer-aided engineering (CAE) methods were employed, and the effects of different design parameters on airflow performance were numerically examined. In order to improve in-cabin air circulation, ventilation duct diameters and vent geometries were evaluated. Accordingly, duct diameters were defined as 50 mm and 70 mm, while vent geometries were modeled as circular and rectangular cross-sections. The results of the flow analyses indicated that the design with a 70 mm duct diameter and a circular vent with a diameter of 68 mm provided the best performance in terms of airflow distribution, pressure loss, and flow uniformity. The findings demonstrate the direct impact of geometric parameters in interior trim design on air quality and passenger comfort. The optimized design approach offers significant contributions in terms of more efficient ventilation, improved passenger comfort, and potential energy savings in service vehicles. It is expected that this study will guide future optimization efforts and interior trim design processes in commercial vehicles.
References
T. B. Chang, J. J. Sheu, J. W. Huang, Y. S. Lin, and C. C. Chang, "Development of a CFD model for simulating vehicle cabin indoor air quality," Transp. Res. Part D Transp. Environ., vol. 62, pp. 433–440, 2018.
P. O. Fanger, Thermal Comfort: Analysis and Applications in Environmental Engineering. Copenhagen, Denmark: Danish Technical Press, 1970.
M. Vaughn, "ASHRAE research report: 2020–2021," ASHRAE J., vol. 63, no. 10, pp. 73–87, 2021.
T. B. Chang, J. J. Sheu, J. W. Huang, Y. S. Lin, and C. C. Chang, "Development of a CFD model for simulating vehicle cabin indoor air quality," Transp. Res. Part D Transp. Environ., vol. 62, pp. 433–440, 2018.
X. B. Xu, X. K. Chen, and J. Y. Xiong, "Air quality inside motor vehicles' cabins: A review," 2018.
O. A. Seppänen and W. Fisk, "Some quantitative relations between indoor environmental quality and work performance or health," HVAC&R Res., vol. 12, no. 4, pp. 957–973, 2006.
T. B. Chang, Y. S. Lin, and Y. T. Hsu, "CFD simulations of effects of recirculation mode and fresh air mode on vehicle cabin indoor air quality," Atmos. Environ., vol. 293, art. 119473, 2023.
S. Pawar, U. R. Gade, A. Dixit, S. B. Tadigadapa, and S. Jaybhay, "Evaluation of cabin comfort in air conditioned buses using CFD," in Proc. SAE 2014 World Congress & Exhibition, Apr. 2014.
B. Pirouz, D. Mazzeo, S. A. Palermo, S. N. Naghib, M. Turco, and P. Piro, "CFD investigation of vehicle's ventilation systems and analysis of ACH in typical airplanes, cars, and buses," Sustainability, vol. 13, no. 12, art. 6799, 2021.
W. P. Jones and B. E. Launder, "The prediction of laminarization with a two-equation model of turbulence," Int. J. Heat Mass Transf., vol. 15, no. 2, pp. 301–314, 1972.
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2026 Songül KILINÇ, Ümmet AYYILDIZ, Kadir Güyen (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors submitting a manuscript retain copyright of their work upon acceptance for publication in Aintelia Science Notes Journal (ASNJ). By submitting, authors agree that:
- Copyright Retention: Copyright of the published article remains with the author(s). BAUDER Press is granted a non-exclusive license to publish, reproduce, distribute, and archive the work.
- Licensing: The article is published under CC BY-NC 4.0, allowing third parties to share and adapt the work for non-commercial purposes, provided appropriate credit is given to the author(s) and the journal.
- Author Rights: Authors are free to deposit, distribute, and reuse their article in any medium (repositories, theses, conferences, teaching materials) without restriction, provided the journal is cited as the original publication venue.